You don't need a total station or a survey crew to get a useful land-area number. A modern phone's GPS, plus a polygon measured around the boundary, gives you square meters, hectares, acres or mu in a couple of minutes. This guide shows how to do it, how accurate it really is, and when you should step up to RTK.
Your phone's GPS receiver produces a stream of latitude/longitude positions. An area-measurement app turns those positions into the corner points of a polygon around your parcel, then computes the enclosed area on a projected (metric) coordinate system — the same shoelace-style polygon math a survey office uses, just fed by GPS instead of a theodolite.
There are two ways to build that polygon:
Both produce the same kind of result: a closed polygon with an area, perimeter and point list you can export.
Phone GPS gives roughly 3–10 m position accuracy under open sky. Area error depends on how that position noise compares to the size of your parcel: on a big field the same few meters of noise is a small fraction of the boundary; on a tiny garden it dominates. As a rule of thumb (open sky, closed loop, steady pace):
| Parcel size | Typical area error (phone GPS) | Good for |
|---|---|---|
| > 1 ha (10,000 m²) | ~1–3% | Farm fields, forestry, land planning estimates |
| 1,000 – 10,000 m² | ~3–8% | Yards, paddocks, landscaping quotes |
| < 1,000 m² | 10%+ (unreliable) | Use RTK, a tape, or tap-mode on a zoomed map |
| Any size, with external RTK | < 1% (cm-level positions) | Small plots, stakeout, boundary-grade reference |
These are practical expectations, not guarantees. Buildings, tree cover, hills and a cold GPS start all widen the error. Treat phone-GPS area as a fast, good-enough estimate for large parcels — and never as a legal boundary survey.
Land paperwork uses different units by region, so the same polygon should be readable in all of them:
SiteStake converts between these instantly, so you can hand a contractor acres while your own records stay in mu or hectares.
If you need centimeter-level positions — small plots, setting-out points, or a number you'll defend — pair the phone with an external RTK receiver over Bluetooth or USB and stream NTRIP corrections from a CORS network. The receiver resolves carrier-phase ambiguities to reach RTK Fixed (≈1–3 cm); the app then uses that corrected position as the measurement source instead of the built-in GPS. RTK + NTRIP is a Pro feature in SiteStake; the free tier already covers walk / drive / tap area measurement for everyday estimates.
Is phone GPS accurate enough to measure land area?
For large parcels under open sky, yes — usually within a few percent. For small plots or boundary-grade work, use external RTK.
Can I measure area without walking the boundary?
Yes. Tap the corners on the map or add your current GPS position as a corner, then close the polygon.
Which area units are supported?
m², hectares, acres and mu, converted automatically.
Do I need an internet connection?
No for GPS area measurement (works offline; cache map tiles in advance). Only RTK / NTRIP correction streaming needs mobile data.
Is my measured data uploaded anywhere?
No. Everything stays on your device unless you export and share it yourself.
SiteStake is a general-purpose GPS map tool for Android: waypoints, area & distance, tracks, GEO-tagged photos, GPX / KML. No ads, no tracking, data stays on your device.
Get it on Google Play See all featuresFor reference only — not a legal-grade survey instrument. Area figures from phone GPS are estimates; verify against official records before any transaction or boundary decision.